Power Tools

from:Stephen Ensminger
Want to buy drum type floor sander.
from:Bruce Spence
I'm looking for a good quality 14" or larger bandsaw for resawing up to 12" wood. Also need belt/disc sander and a drill press.
from:Mark Eaton
institution:All-IN-ONE WOOD TOOLS
ALL-IN-ONE Wood Tools is the Canadian Dealer of the Shopsmith Product line. We are happy to field any and all questions regarding Shopsmith from our Canadian owners or anybody interested in purchasing a Mark V Woodworking System. E-Mail us or drop us a line in Canada at 1-800-370-3834
from:Jeff Fischer
I have a Jet model DC-650 Dust collector that I would like to sell. Reason for selling, is I bought it before totally getting my shop set up and ended up running more pipe and gates then I thought I would. It is about 6 months old and in NEW condition with very little use on it. I am in the Washington D.C. area, so I could arrange to deliver it in or there abouts.
I am asking $198 for it, which is abit of savings over mail order, or if you had to buy it local with tax etc.
Leave me a note with any questions.
from:Brent Orr
I have a Defiance Pin Router for sale. This is a very heavy duty cast iron machine. 5 H.P. 3 phase. Have some extra collets and bits. Asking $800.00 or best offer. E-mail if have questions. Thanks
from:mike bryant
institution:mike bryant remodeling
I'am looking for a marlin router carveing/duplicate machine or one like it; also for a place where it is possible to buy carbide router carveing bits like a round over bit that has no bearing on the end but instead come to a sharp point on the end for ropeing or cutting spiral beads on lathe stock with a router. please e-mail any help or info to me. many thanks!
mike bryant
from:Dana Anderson
institution:Iowa Frame
For Sale:
RBI Industries Ultra Hawk scroll saw. Model 220. Used only 3 months. Paid over $1000 - will sell for $750 with accessories.
E-Mail or call (319) 346-1672
from:Rich Matselboba
To people who collect OLD tools :::
I have an old scrollsaw (circa 1940's) ... green cast iron, two pieces (1. motor, 2. saw itself), pulley drive, mounted on plywood, Montgomery ward label, no year of birth, definitely an antique, but it works ... If anyone is interested, let me know ... thanks
from:Joe Johns
institution:Woodworking In Western Montana
Are you shopping for a wood lathe? Why not build your own?
I have designed a floor model lathe you can build yourself which will be every bit the lathe as the ones available commercially, just $$$cheaper$$$.
If interested, you can order the plans and instructions from my Home Page located at http://www.ronan.net/~woodwork.
from:Steve Hicks
institution:SdH Designs in Wood
I have a Yates American wood lathe No. 12, SN R2460 (1940's). I'm looking for a source of parts; Tool Support Base, Chucks, etc. I would appreciate any ideas. e mail or phone (808) 885-7769
from:BRYAN BUTENSKY
institution:BUTENSKY SERVICES COMPANY INC.
BUTENSKY SERVICES COMPANY INC. 10 COUNTY LINE ROAD SOMERVILLE N.J. 08876
TEL 1-800-447-3784 FAX 908-707-9822
SPECIALIZING IN WOODWORKING POWER TOOL SALES, SHOP & FIELD SERVICE AMBITECH-MAYA-SAFE-T-TOOL-B&D-BOSCH-DAYTON-DELTA-DREMEL-DEWALT HITACHI-HOMELITE-JET-MAKITA-MILLWAUKEE-PORTER CABLE-POWERMATIC PROTEC-ROCKWELL-RYOBI-SCMI-SKIL-SAFETY SPEED CUT- WILTON-YATES ETC-ETC-ETC-ETC-ETC-ETC-ETC-ETC-ETC-ETC-ETC-ETC-ETC-ETC-ETC
from:Toby Dennis
institution:VISTA MACHINES INC
VISTA MACHINES has developed an up-cut saw called the ANGLE-BOSS. It will cut up to 60 degrees to the right or left,and the 18" blade will tilt up to 45 degrees.This machine will out perform the radial-arm saw in production cut off work and is very safe for the operator! Please e-mail at tdennis@sun-link.com or call VISTA MACHINES INC 717-359-9212 or fax 717-359-4222 for more information.
from:ANDRE' STOUVENEL
institution:MID-AMERICA WOODWORKING MACHINES
message:_____________________JET EQUIPMENT SALE________ 2 YEAR WARRANTY_BR> 20"X8"PLANER 3HP_1 PH $$2129.00 US (INCLUDES FREIGHT-US)________
________________________________________________________________
_____________________REBATE SALE (25.00 TO 100.00 FROM JET )____
_____________________MACHINES LISTED BELOW ARE FOB ST.PAUL MINN.
JWP-15HO 15" INCH PLANNER________1189.00_____100.00 REBATE______
JWBS_14CS BANDSAW CLOSED CAB______524.00______30.00 REBATE______
JWTS_10JF CONTRACTORS SAW 10"_____539.00______30.00 REBATE______
_______ALSO AVALIBLE: 6"___8"JOINTER_______SHAPERS_____________________
________________________________________________________________
E-MAIL FOR INFO ______OR CALL FOR ANDRE' AT 612.779.2379
from:Bruce Mosher
institution:Hardwood Heirlooms
I have a 18" Porter jointer that's looking for a new home. 15 horse 3 phase motor. FOB Fowlerville, MI I'm out till Wed, but you can leave a message at (517)655-6123. Cheers - Bruce
from:Jonathan Duke
institution:Give me more power....

DeWalt DW991k 14.4 volt cordless drill for sale.

1.5 years old, with a second battery.

Light usage & well maintained.

Asking US$150 for the whole unit (the only piece I don't have is the original cardboard box).

Send me EMail if interested.

from:Ray Dennis
institution:Ray's Woodworking
For Sale in Wash DC area

1. Powermatic 45 Lathe.. good condition with brand new motor.. $850

2. Delta UniFence with Electronic Gauge..Almost brand new... $225

from:JOel A. Cohen
institution:Joel's Woodworking
Performax 22/44 inch drum sander in Wash. D.C. area, excellent condition orig.-$1500.00 sell $900.00 incl. many rolls paper
from:Steven Zawalick
institution:IronWood Designs
Dayton 2 HP Electric Motor.

Capacitor start, capacitor run. New, in box. 115v (25 amp) or 230v (12.5 amp) operation. 1800 RPM. Ball Bearing Construction (permanent lubrication). Continuous duty rating !! Open, fan cooled (104 deg.F max ambient). 7/8" dia. shaft. 3 1/2" shaft height. Rigid Mounting. Great for compressors, blowers, dust collection, or power tools. $170 + $15 shipping for two day Fed-Ex.

Contact:
Steven Zawalick, IronWood Designs,
(805) 542-9219,
zawalis@callamer.com

from:Oscar Leal
I want to BUY a good used CORDLESS DRILL. I'd prefer a 12V model of a major manufacturer(Dewalt, Makita, etc..). Please respond with drill's manufacturer, model no., included accessories, and your price. Price should include your cost to ship it to me in Austin, TX.
from:Thomas Homer
COMPLETE WOODSHOP AVAILABLE! Older industrial machines- Porter, Oliver, Crescent, etc. Jointer, planer, tablesaws, widebelt, stroke, & edge sanders, pin router, plus all electrical and shop fixtures. Very reasonable prices, FOB Grand Rapids, Michigan. Call or fax for list and more info: (616) 361-0327
from:Kerry Morgan
institution:Morgan Trim Inc.
For sale: EP-3 edgebander with Quick melt glue pot 1993 model parts and service from Adwood Inc. good working machine for small shop. asking $4500.00 If interested call 806 6559777
from:Greg Goldin
WANTED: ORIGINAL OR COPY of YATES-AMERICAN Y-30 Bandsaw owner's manual/operator's manual. I do not have a serial number for my machine, but guess it to be immediately post World War II. It is a pattern's makers saw, with a massive casting weighing approx. 2,000 lbs. The entire upper housing and wheel are tensioned along a dovetailed keyway. The table is 28 x 30, with a 22 x 18 auxiliary table. The trunion itself is 12" wide. Anybody ever seen the owner's manual? Would very much like to find one. Please reply via my e-mail address, ggoldin@igc.apc.org or phone 213-938-6891 or fax 213-937-5360. Thanks.
from:Cy Farkas
institution:Factory Direct
Tools on Line. Visit our site where you can shop, compare and order.. all in one step. We feature Porter, Bosch and Skill to name a few. Visit our other departments for pocket tools and even personilized Swiss Army. The site location is http://www.dataw.com
from:Gary Blackwood
I have an old 12" jointer for sale. It needs work, but all parts are here. No motor. Very heavy duty. $100. If interested, please call (517)783-4675. Located in Jackson, Michigan.
from:Bryan Penny
The bracket on my Rockwell table saw holding the rip fence has failed. This part is not available in South Africa. Is there a supplier in the USA or elsewhere I could purchase the part from?
from:mike lovatto
institution:Sawing Solutions
Quality band and circular saw blades for woodworking industry and hobbyist.
from:Mickey Kern
institution:Hardin High School
I have obtained an OLD Craftsman shaper table. It seems to be in good working order, but I would feel much more secure with the manual. The Model number is 534.0974. I contacted Sears and they responded with the ever helpful "no longer available." Can anyone come to my aid?
from:Bruce Mosher
institution:Hardwood Heirlooms
Who's interested in a 16" Porter Jointer? 15H 3Ø motor. Post me here w/ address for info.
from:Danny Schulze
WANTED:
Interested in purchasing good used Delta Unisaw. Located in NW Ohio.
from:Chuck Kasch
institution:C. Kasch Contracting
Looking for a face plate and operating manual for the Wallace No. 46 multi-speed lathe. Also interested in operating manual for a Craftman 12" bandsaw, model 113. E-mail if you can help.
from:dave fernando
institution:r&d sales
is there anyone interested in 2 porter cable lock mortisers.in good condition. send email or phone/fax 1-516-326-2005...dave
from:Jim Sinkovic
I'm looking for an older model Delta 10 or 12" compound mitre saw. The new ones seem to have very hokey angle adjusters and gauges. Sliding arm not req'd. I'm in the Toronto Canada area, but I'll go as far as Buffalo or Ottawa.
from:d brottman
wanted: 10 inch table saw, good condition
from:Troy Cook
I am looking to purchase a Makita 6.5 mm high speed drill. The specific model # is DD 2011. I will consider another brand if it meets the following requirements. It must be a pistol grip model for one hand use, 8,000 RPM or better, 110 volt, 4.5 amp or better. Please contact me directly at my e-mail address. Thanks.
from:Laszlo M. Gregor
For Sale:

Excellent starter or small shop table saw.

10" Tabletop with large stand and extended wooden wings table saw Manufactured by Tradesman. A little over a year old. Table width is 50" and depth is 18". Motor is direct drive and is 13amp 115 volt 1.5hp. More than adequate power but I am looking to upgrade to a larger capacity saw with a large rip width. Maximun rip to right of blade is 14". Will sell for $100.00

Includes rip fence, stand, meiter gauge, and one steel 24tooth 10" blade and one slightly used 32 tooth telfon coated carbide blade, also 10"

E-Mail if interested at lgregor@harris.com or lgregor@usa.pipeline.com

from:Ed Ryan
I'd like to buy a replacement table for my Shopsmith Mark V500. Hopefully, someone out there has an extra afterupgrading to the 510 table system. (just the table not the supports, etc.)I'm in Dayton Ohp.s. I'll pay shipping too. W ph 513-445-2043 / H 513-433-4182
from:Henry FM Garrett
I'm taking offers on selling my woodworking equipment now that my wife's furniture projects are done.
10" Contractor Series Table Saw - new condition
Bosch Steel Table Extension (for router mount)
Excalibur Adjustable Dado blade - carbide
Molding Head Kit
Sanding Disk Kit
Various Carbide Blades (coarse, fine, etc)
Panel Stands for outboard support
Full Motion Rotating Wheels all 4 legs
HP Craftsman Hand Circular Saw
Craftsman 1/4 sheet Hand Sander
Bosch Random Orbital Hand Sander
Craftsman Hand Drills
I'm located in Ridgewood, NJ for easy pick-up
E-mail me with offers for all or part
from:ANDY ANDREOU
institution:ANDREOU MACHINERY
ROUTER BITS SHAPER CUTTERS FOR SALE: 201-224-6005
from:John Hufnagle
institution:Marcam Corp.
Selling Delta Portable Planer 12"
Very Good Cond. $290
Boston area
from:Larry Kearns
institution:Wheeler Kearns Architects
Wanted 14 inch Delta/Rockwell, Boice Crane or Walker Turner Vertical Bandsaw..Older models preferred. Chicago Area Contact me by email at larry@wkarch.com.
from:Tom Miller
institution:The Cabinet Shoppe
I am wanting to sell 2 Foley Sharpening machines. One is a foley carbide saw sharpening machine and the other is a foley carbide tool grinder for router bits and shaper cutters. These tools were about $4500.00 each. I will be glad to accept any offers. thanks tom Miller abilene, tx. 1-915-675-0935
from:Richard Baila
institution:BETCO
for sale 8x20" powermatic thicness planer 15HP 3 phase reversable ajustable speed feed two sets of knives and spider for set up $3,500 fob Bellingham Wa. and a 26" heavy duty tilt table band saw will handle up to 12" thick stock 5HP 3 Phase moter $1,500 OBO, and an old Davis and Wells spindle shaper with numerous knives and patterns also 3 phase
from:Larry Kearns
institution:Wheeler Kearns Architects
Looking for a 14 inch band saw - preferrably Delta Rockwell in Chicago area...
from:Brian Alt
Help is needed on finding a diamond coated scroll saw blade.
Last seen at a woodworkers show in a local fair grounds.
ANY help would be greatly appreciated.
from:David Bowen
institution:Lakeville Woodworking
Three-Story Custom Woodworking Business (First Floor Shop: 1200sf) / Home (Second & Third Floor Living Space: 2400sf); Location Location Location, Lakeville, CT; Small shop, on the green of well known small town with exceptional clientele. Very upscale market and community. Well established, good reputation. Consistant work!!! Walk to beach,markets, Skiing, Lakeville-Salisbury is second home to very successful people...Be one for $ 175,000 home AND zoning ok'ed retail/commercial shop!
from:John Hufnagle
institution:Marcam Corp.
message:Delta 12" Portable Planer very good cond. $290 Boston email at johnh@marcam.com
from:Tom Homer
For Sale: Industrial WW machinery, some older & not pretty, but all accurate, solid, & affordable. Selling off entire shop. Powermatic 20" planer, 7.5 HP w/ digital read and grinder, $3900. Porter pin router, 30" throat, floating head, 7.5 HP, w/ Ambi-tech electronic brake, $2200. Wide belt, stroke, & edge sanders; 2 tablesaws, shaper, oscillating mortiser, fixtures & electrical, more. E-mail or call/fax for list, (616) 361-0327.
from:Dong Wook Son
institution:KLBA
For Buy : I'm a member of KLBA (Korean Log Builder Association). Now we need to buy Husqvarna 254xp chain saw. Please inform me whom we contact with? We have to pay almost US$500/per for this model in Korea.

Back to The Woodworking Times